|
|
Three Piece Flange End. (White) |
Special Features of Three Piece Flange End. (White)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90ºC Temp.
4. Hydraulically and Pneumatically tested for 15 Kg. upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
6. Flange drilled as per customer's specification.
|
|
|
|
|
Three Piece Screw End. (White) |
Special Features of Three Piece Screw End. (White)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15 Kg.
5. Protective and Resistive from most of the corrosive Chemicals.
|
|
|
|
|
Sight Glass Flange End. (White) |
Sight Glass
Size 25mm. to 100mm.
Material Polypropylene, HDPE
Available Length 4" & 3"
|
|
|
|
|
Diaphragm Flange End. |
Special Features of Diaphragm Flange End.
1. One piece rugged body haveing lower rifb connecting both Flanges makes the valve absolutely strong enough to withstand external and internal loads developed on a pipeline.
2. Latest inverted type Diaphragm remains unstressed while the valve is in closed condition. This plus point makes the life of Diaphragm double than the conventional old type Diaphragm available in market.
3. Deeper seat allows maximum flow through valve and gives excellent throutling charcteristics
4. The perfectly matched seat and compressor gives bubble tight closer even in solurry applications, and with a single hand torque valve can be closed against 10 Kg/CM² pressure.
5. Available with Neoprene, Teflon coated or pure teflon Diaphragm.
6. Poonam Valves are Saunders 'A' Type available with flanged ends to BS Table 'D', 'E', ANSI-150 and DIN Std. Flange drillings in Screwed ends to BSP.
7. Every Assembled Diaphragm Valve undergoes functional and pressure testing of body and seat hydrotest of 6" upto 10 Kgbefore despatch.
8."POONAM" Diaphragm valves are ideally suited to the handling of severely contaminated, aggressive and non-aggressive media. Application in Water Treatment (Ion-Exchanger), Desalination, Sew-age Treatment, Electroplating, Photography, Electronics, Chemical and Food Industries are just a few of the countless examples
9. Hydraulically Tested - Body & Seal at 10Kg. (165psi)
10. Flange Drilled to table D.BS - 10
|
|
|
|
|
Diaphragm Valve Screw End. |
Special Features of Diaphragm Valve Screw End.
1. One piece rugged body haveing lower rifb connecting both Flanges makes the valve absolutely strong enough to withstand external and internal loads developed on a pipeline.
2. Latest inverted type Diaphragm remains unstressed while the valve is in closed condition. This plus point makes the life of Diaphragm double than the conventional old type Diaphragm available in market.
3. Deeper seat allows maximum flow through valve and gives excellent throutling charcteristics.
4. The perfectly matched seat and compressor gives bubble tight closer even in solurry applications, and with a single hand torque valve can be closed against 10 Kg/CM² pressure.
5. Available with Neoprene, Teflon coated or pure teflon Diaphragm.
6. Poonam Valves are Saunders 'A' Type available with flanged ends to BS Table 'D', 'E', ANSI-150 and DIN Std. Flange drillings in Screwed ends to BSP.
7. Every Assembled Diaphragm Valve undergoes functional and pressure testing of body and seat hydrotest of 3" upto 10 Kg before despatch.
8."POONAM" Diaphragm valves are ideally suited to the handling of severely contaminated, aggressive and non-aggressive media. Application in Water Treatment (Ion-Exchanger), Desalination, Sew-age Treatment, Electroplating, Photography, Electronics, Chemical and Food Industries are just a few of the countless examples
9. Hydraulically Tested - Body & Seal at 10Kg. (165psi).
10. Flange Drilled to table D.BS - 10
|
|
|
|
|
Non Return Valves Flange End. |
Special Features of Non Return Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
|
|
|
|
|
Butterfly Valves.Butterfly Valves. |
Special Features of Butterfly Valves.
1. Available size in 50 mm to 200 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15Kg./CM².
5. Protective and Resistive from most of the corrosive Chemicals.
6. Flange drilled as per customer's specification.
|
|
|
|
|
Foot Valves Flange End. |
Special Features of Foot Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
|
|
|
|
|
Foot Valves Screw End. |
Special Features of Foot Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
|
|
|
|
|
Engineering Products. |
Available M.O.C.: P.P.C.P.
|
|
|
|
|
|
|
|
|